Assembly
Rounded
Side
Rounded
Side
13
•First, fit an M5 lock nut into an opening in the short tube. Make sure the rounded side of the lock nut faces out.
•Next, insert an M5 x 30 mm screw through the opening in the opposite side of the short tube. Fully tighten the screw with the Allen wrench.
Lower Seat Tube
14 Upper Seat Tube
•Tip the assembly on it’s side on a flat surface.
•Fit the lower seat tube into the upper seat tube.
15
•First, fit an M5 lock nut into an opening in the upper seat tube. Make sure the rounded side of the lock nut faces out.
•Next, insert an M5 x 30 mm screw through the opening in the opposite side of the upper seat tube. Fully tighten the screw with the Allen wrench.
Clip
Slot
Mobile
Clip
Toy
16
•Turn the assembly upright.
•Fit the string (below the knot) of a toy through the slot in a clip on the mobile.
•Pull down on the toy to be sure it is secure on the mobile.
•Repeat this procedure to assemble the other three toys to the mobile.
7