Assembly
Waist | Seat |
Belts |
|
Pad
Slots
9
•Turn the seat upright.
•Fold the top of the pad down. Insert the waist belts through the slots in the pad. Make sure the waist belts are not twisted.
10
•Fit the pad edges around the rim of the seat.
•Hook the two fastener straps on each side of the pad onto the rim on each side of the seat.
Tray
Slot
11
•Insert the tray tabs into the slots in each side of the seat.
Lower Seat Tube
Short Tube
12
• Fit the lower seat tube into the short tube on the seat back.
PRINTED IN CHINA | |
©2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. |
6