Fisher-Price J7825 owner manual Battery Installation, Battery Retainer Volt

BATTERY INSTALLATION H

IMPORTANT! Use only a Power Wheels® 6 volt (4.0 Amp/Hr.) battery and built-in thermal fuse. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels® 6 volt

(4.0 Amp/Hr.) charger before operating your vehicle for the first time. Charge the battery for at least 14 hours after each use of the vehicle. Never charge the battery longer than 30 hours. Failure to follow these instructions may damage your battery and will void your warranty.

Seat

Unlocked

Lock

Fastener

1

•Locate the lock fastener in the back end of the seat.

•Using a slotted screwdriver, turn the lock fastener 1/4 turn to the unlocked position .

•Lift the seat from the vehicle.

Battery

Retainer

6 Volt

Battery

Battery

Compartment

3

•Fit the Power Wheels® 6 volt (4.0 Amp/Hr) battery inside the battery compartment with the wires facing towards the rear of the vehicle.

	Battery
	Retainer
	Battery
	4
•	Place the battery retainer over the battery.
•	Replace the screw through the end of the battery retainer and into
	the vehicle.
•	Tighten the screw with a Phillips screwdriver. Do not over-tighten.

2

• Loosen the screw in the battery retainer and remove it.

J7825a-0920 11