Fisher-Price J7825 Charger, Battery Connector Unlocked Seat Lock Fastener, Battery Retainer

Models: J7825

1 20
Download 20 pages 4.81 Kb
Page 7
Image 7

BATTERY CHARGING

IMPORTANT! The battery must be removed from your vehicle for

 

the initial charge in order to complete assembly. After assembly is

Charger

complete, you do not need to remove the battery from your vehicle

Connector

to recharge it.

 

E

Battery

Connector

Unlocked

Seat

Lock

Fastener

1

Locate the lock fastener in the back end of the seat.

Using a slotted screwdriver, turn the lock fastener 1/4 turn to the unlocked position .

Lift the seat from the vehicle.

Battery

Retainer

Battery

2

Battery

Compartment

 

Loosen the screw in the battery retainer and remove it.

Lift the battery retainer and remove the battery from the bat- tery compartment.

3

• Plug the battery connector into the charger connector.

4

• Plug the charger into a standard wall outlet.

Note: If power flow to the wall outlet is controlled by a switch, make sure the switch is ON.

Before first time use, charge the battery for at least 18 hours. Never charge the battery longer than 30 hours.

Recharge the battery after each use of your vehicle for at least 14 hours. Do not charge the battery longer than 30 hours.

Once the battery is charged, disconnect the charger connector from the battery connector. Unplug the charger from the wall outlet. The battery is now ready to be installed in your vehicle. Please see “Battery Installation” on page 11 for detailed instructions on installing your battery. If your battery is already installed in your vehicle, simply re-connect the battery connector and motor connector and

replace the battery retainer.

J7825a-0920

7

Page 7
Image 7
Fisher-Price J7825 owner manual Charger, Battery Connector Unlocked Seat Lock Fastener, Battery Retainer