Panasonic KX-TG9541 Alarm, Main menu Key detector*13 Sub-menu Settings Code Unit, Search, #655

Programming

Main menu: “Key detector”*13

Sub-menu 1	Sub-menu 2	Settings		Code	Unit
Search	–		–	#655	–
Battery check	–		–

*1 For Line 1

*2 For Line 2

*3 If you program these settings using one of the units, you do not need to program the same item using another unit.

*4 After the Bluetooth device is paired, the device name is displayed.

*5 For CELL 1

*6 For CELL 2

*7 For CELL 3

*8 For CELL 4

*9 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received.

To turn this feature on, select “Caller ID auto”. To turn this feature off, select “Manual”. (Caller ID subscribers only)

To use this feature, set the date and time first (page 16).

*10 The preset melodies in this product are used with permission of © 2007 Copyrights Vision Inc.

*11 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 5). If you select a melody, you cannot distinguish lines by their ringers.

*12 This tone lets you know when you receive an outside call while you are on another line or an intercom call. If you select “On”, the tone sounds 2 times.

*13 This setting is available when you have the key detector (KX-TGA20). Read the installation guide for more information on the key detector.

*14 For models with supplied key detectors, the display shows “1:Detector1”.

*15 If you register 2 or more key detectors.

*16 If you have 2 or more key detectors.

*17 This menu is not displayed when scrolling through the display menus. It is only available in direct command code.

*18 You can set music play during the hold. The preset melody in this product is used with permission of © 2006 Copyrights Vision Inc.

*19 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.

*20 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. The setting should stay at “700 ms” unless pressing MFLASHN fails to pick up the waiting call.

*21 Generally, the line mode setting should not be changed. If the LINE 1 indicator or LINE 2 indicator does not light when another phone connected to the same line is in use, you need to change the line mode to “A”.

			Handset
Alarm
	1		M	N#720
			MENU
An alarm sounds at the set time for 3 minutes	2		MbN: Select the desired alarm option. a
once or daily. Alarm can be set for each handset.			MSELECTN
Important:		“Off”			Turns alarm off. Go to step 7.
R Make sure the unit’s date and time setting is		“Once”			An alarm sounds once at the
correct (page 16).					set time.
For assistance, please visit http://www.panasonic.com/help						43

TG954x(en)_0628_ver031.pdf 43

2013/06/28 12:35:31