Panasonic KX-TG9541 Remote operation, Remote access code, Using the answering system remotely

Answering System for Landline

Activating/inactivating the remote access code to play messages

If you activate this feature, you must enter the remote access code (page 59) to play the new message from the new message alert call. This is so that unauthorized parties cannot listen to your messages. The default setting is “Inactivate”.

–“Inactivate”: You can listen to the message by pressing 4 to play new messages (without entering the remote access code).

–“Activate”: You must enter your remote access code (page 59) and then press 4 to play new message.

Handset / Base unit

1For line 1: MMENUN#3381

For line 2: MMENUN#3382

2MbN: “Remote code” a MSELECTN

3MbN: Select the desired setting. a MSAVEN

4Proceed with the operation for your unit. Handset: MOFFN

Base unit: MEXITN

Listening to messages

After you answer the new message alert, you can listen to the messages as follows.

n When the remote access code is set to “Inactivate”:

Press 4 to play the new message during the announcement.

n When the remote access code is set to “Activate”:

1Enter the remote access code (page 59) during the announcement.

2Press 4 to play the new message.

Note:

R Within 10 seconds after listening to new messages, you can press #9 during the call to turn off the new message alert by a call feature.

R Even if the unit makes a new message alert call, the handset redial list does not show the record. However, on the base unit redial list it is shown as “Message alert”.

Remote operation

Using a touch-tone phone, you can call your phone number from outside and access the unit to listen to messages or change answering system settings. The unit’s voice guidance prompts you to press certain dial keys to perform different operations.

Remote access code

A 3-digit remote access code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default setting is “111”.

Program this setting using either the base unit or one of the handsets.

Important:

R To prevent unauthorized access to this product, we recommend that you regularly change the remote code.

Handset / Base unit

1For line 1: MMENUN#3061

For line 2: MMENUN#3062

2Enter the desired 3-digit remote access code.

3 MSAVEN

4Proceed with the operation for your unit. Handset: MOFFN

Base unit: MEXITN

Deactivating remote operation

Press * in step 2 on “Remote access code”, page 59.

R The entered remote access code is deleted.

Using the answering system remotely

1Dial your landline phone number from a touch-tone phone.

2After the greeting message starts, enter your remote access code.

3Follow the voice guidance prompts as necessary or control the unit using remote commands (page 60).

4When finished, hang up.

For assistance, please visit http://www.panasonic.com/help 59

TG954x(en)_0628_ver031.pdf 59

2013/06/28 12:35:33