Panasonic KX-TG9542, KX-TG9541 Other programming, Registering a unit, Changing the handset name

Models: KX-TG9541 KX-TG9542

1 88
Download 88 pages 44.99 Kb
Page 46
Image 46

Programming

MERASEN a MbN: Yesa MSELECTN a

MEXITN

Note for handset and base unit:

R When viewing, Block w/o num.*1/Block

w/o number*2 is displayed if the blocking incoming calls without phone number feature is turned on. To turn the feature off: MERASEN a MCN a MSAVEN a MOFFN (Handset) or MEXITN (Base unit)

*1 Handset

*2 Base unit

Other programming

Changing the handset name

Each handset can be given a customized name (“Bob”, “Kitchen”, etc.). This is useful when you make intercom calls between handsets. You can also select whether or not the handset name is displayed in standby mode. The default setting is No. If you select Yeswithout entering any handset name, Handset 1to Handset 6is displayed.

Handset

1MMENUN#104

2Enter the desired name (max. 10 characters).

3 MSAVEN

4MbN: Select the desired setting. a MSELECTN 2 times a MOFFN

Registering a unit

Operating additional units

Additional handsets

Up to 6 handsets can be registered to the base unit.

Important:

R See page 4 for information on the available model.

Registering a handset to the base unit

The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset.

1Handset:

MMENUN#130

2Base unit:

Press and hold MLOCATORN for about 5 seconds until the registration tone sounds.

R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step.

3Handset:

Press MOKN, then wait until a long beep sounds.

Deregistering a handset

A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system.

Handset / Base unit

1MMENUN#131

R All handsets registered to the base unit are displayed.

2MbN: Select the handset you want to cancel. a MSELECTN

3MbN: Yesa MSELECTN

4Proceed with the operation for your unit. Handset: MOFFN

Base unit: MEXITN

46

For assistance, please visit http://www.panasonic.com/help

TG954x(en)_0628_ver031.pdf 46

2013/06/28 12:35:32

Page 46
Image 46
Panasonic KX-TG9542 Other programming, Registering a unit, Changing the handset name, Operating additional units