Panasonic KX-TG9542 Cellular line selection, Storing your area code for dialing, Local call

20

TG954x(en)_0628_ver031.pdf 20

Handset / Base unit

Note:

Note:

MMENUN#632

Handset / Base unit

Important:

Link to Cell

Program this setting using either the base unit or		For CELL 3: MMENUN#6253
one of the handsets.		For CELL 4: MMENUN#6254
		R A long beep sounds.
R When you are using a cellular line or a	2 Proceed with the operation for your unit.
		Handset: MOFFN
Bluetooth headset, the base unit loses its
		Base unit: MEXITN
connection from other Bluetooth devices
(cellular phone or headset). To automatically
	Cellular line selection
resume the connection to cellular phones, leave
the auto connection on.
R Some cellular phones lose connection after		Handset
usage, please check the specifications of your	This feature determines which cellular line is
cellular phone for more details.	selected to make cellular calls when you press
	MCELLN on the handset.
	The following settings are available:
1
	–	“Manual” (default): You can select the desired
2 MbN: Select the desired setting. a MSAVEN
		cellular line when making a call.
3 Proceed with the operation for your unit.	–	“Cellphone 1”: CELL 1 is selected.
Handset: MOFFN	– “Cellphone 2”: CELL 2 is selected.
Base unit: MEXITN	– “Cellphone 3”: CELL 3 is selected.
	– “Cellphone 4”: CELL 4 is selected.
R Some cellular phones may ask you if you accept	1	MMENUN#634
	2 MbN: Select the desired setting. a MSAVEN
the connection requirement from the base unit.
In that case, select “Off” in step 2. Check the	3	MOFFN
specifications of your cellular phone.
	Storing your area code (for dialing
Connecting/disconnecting the cellular phone
	only a 7-digit phone number to make
manually
	a local call)
If you will not be using the paired cellular phone’s
link to cell feature temporarily (for example, you do	You need to add your area code when making
not want the unit to ring when your cellular line	cellular calls to a phone number in your area.
receives a call), you can disconnect your cellular	Once you store your area code, it is automatically
phone from the base unit. If you want to use it	added to the beginning of the 7-digit phone
again, reconnect the cellular phone to the base	number when making cellular calls.
unit.	Program this setting using either the base unit or
Program this setting using either the base unit or	one of the handsets.
one of the handsets.
		Handset / Base unit
R Even if a paired cellular phone was	1	MMENUN#633
disconnected from the base unit, if it is brought	2 Enter the 3-digit area code.
within the base unit’s range during the auto		R To correct a digit, press MCLEARN.
connection interval, it may automatically	3	MSAVEN
connect to the base unit (page 19).	4 Proceed with the operation for your unit.
R A disconnected cellular phone is not unpaired
		Handset: MOFFN
from the base unit, so pairing it to the base unit
		Base unit: MEXITN
again is unnecessary.

1To connect/disconnect:

For CELL 1: MMENUN#6251

For CELL 2: MMENUN#6252

For assistance, please visit http://www.panasonic.com/help

2013/06/28 12:35:30