Using the landline: Press MZN.
Note for handset and base unit:
R In step 5 on the handset or step 4 on the base unit, the unit automatically uses the line you set in line selection mode (page 17) to call back. When the line selection mode is set to Auto, the indicated line ( or ) is used for the call. If the indicated line is already being used or you want to select the other line:
Handset: Press ML1N or ML2N.
Base unit: Press MLINE 1N or MLINE 2N.
Caller ID number auto edit feature Handset / Base unit
3 Proceed with the operation for your unit.
Handset:
4 Using a cellular line:
To make a cellular call, continue from step 3, “Viewing the caller list and calling back”, page 47.
2 Press MCN to search from the most recent call, or MDN to search from the oldest call.
MbN: Select the desired entry.
1 Proceed with the operation for your unit. Handset: MCN CID
Base unit: MCIDN
MCIDN
Handset / Base unit
1
2
3 Press MEDITN repeatedly until the phone number is shown in the desired format.
Base unit
3 To call back, press the desired cellular line key (MCELL 1N to MCELL 4N).
To exit, press MEXITN. n Using the landline
5 Using a cellular line:
To make a cellular call, continue from step 3, “Viewing the caller list and calling back”, page 47.
Using the landline: Press M N.
Base unit
1 MCIDN
2 Press MCN to search from the most recent call, or MDN to search from the oldest call.
4 Press MEDITN repeatedly until the phone number is shown in the desired format.
Caller ID Service

To call back, press MN.

To exit, press MOFFN.

Base unit:

To call back, press MZN.

To exit, press MEXITN.

Note for handset and base unit:

R If the entry has already been viewed or answered, “” is displayed, even if it was viewed or answered using another unit.

R to indicates the caller information was received from the cellular line.

R and indicates the caller information was received from the landline.

R In step 3, the unit automatically uses the line you set in line selection mode (page 17) to call back. When the line selection mode is set to Auto, the indicated line ( or ) is used for the call. If the indicated line is already being used or you want to select the other line: Handset: Press ML1N or ML2N.

Base unit: Press MLINE 1N or MLINE 2N.

Editing a caller’s phone number

You can edit a phone number in the caller list by removing its area code and/or the long distance code “1”.

Handset

1MCN CID

2MbN: Select the desired entry.

3MMENUN a MbN: Edita MSELECTN

Once you call back an edited number, the unit which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the unit as follows:

When the call is being received, the Caller ID number is displayed in the same format as the edited number.

After the call has ended, the caller’s phone number is displayed in the same format as the edited number, when reviewed from the caller

list.

For example, you can use this feature to set the unit to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code.

48

For assistance, please visit http://www.panasonic.com/help

TG954x(en)_0628_ver031.pdf 48

2013/06/28 12:35:32

Page 48
Image 48
Panasonic KX-TG9542, KX-TG9541 Editing a caller’s phone number, To call back, press M N To exit, press Moffn, List