Panasonic KX-TG9542, KX-TG9541 Silent mode Call block, Daily, Turning silent mode on/off

Programming

“Daily”		An alarm sounds daily at the set	2	MbN: Select the desired setting. a MSAVEN
		time. Go to step 4.	3	R If you select “Off”, press MEXITN to exit.
3	Enter the desired month and date. a MOKN			Enter the desired hour and minute you wish to
				start this feature.
4	Set the desired time.		4	MAM/PMN: Select “AM” or “PM”. a MOKN
5	*: Select “AM” or “PM”. a MOKN		5	Enter the desired hour and minute you wish to
6	MbN: Select the desired alarm tone. a		6	end this feature.
	MSELECTN			MAM/PMN: Select “AM” or “PM”.
	R We recommend selecting a different ringer		7	MSAVEN a MEXITN
7	tone from the one used for outside calls.
	MSELECTN a MOFFN		Changing the start and end time
Note:				Handset / Base unit
R To stop the alarm, press MOFFN or place the			1	M	N#237
	handset on the base unit or charger.				MENU
			2	Continue from step 3 for handset or step 3 for
R When the handset is in use, the alarm will not				base unit, “Turning silent mode on/off”,
	sound until the handset is in standby mode.
				page 44.

Silent mode				Call block
	Silent mode allows you to select a period of time			This feature allows the unit to reject calls when:
	during which the handset and/or base unit will not
				– the unit receives a call from a phone number
	ring for outside calls. This feature is useful for time
				stored in the call block list as unwanted (“Storing
	periods when you do not want to be disturbed, for
				unwanted callers”, page 44).
	example, while sleeping. Silent mode can be set
				– the unit receives a call without phone number
	for each unit.
				(“Blocking incoming calls without phone
	Important:			number”, page 45).
	R Make sure the unit’s date and time setting is			When a call is received, the unit rings for a short
				time*1 while the caller is being identified. If the
	correct (page 16).
				phone number matches an entry in the call block
	R If you have set the alarm, the alarm sounds
				list, the unit emits no sound to the caller, and
	even if the silent mode is turned on.
				disconnects the call. (Caller ID subscribers only)
				*1 This is called first ring. If you do not want the
	Turning silent mode on/off
				first ring to sound, turn this setting to “Off”
	Handset			(page 45).
1		MMENUN#238		Important:
	2 MbN: Select the desired setting. a MSAVEN			R When the unit receives a call from a number
		R If you select “Off”, press MOFFN to exit.		that is stored in the call block list or a call
	3 Enter the desired hour and minute you wish to			without a recognized phone number, the call is
		start this feature.		logged in the caller list (page 47) with after
	4 *: Select “AM” or “PM”. a MOKN			the call is disconnected.
				R You can program this setting using either the
	5 Enter the desired hour and minute you wish to			base unit or one of the handsets.
		end this feature.
	6 *: Select “AM” or “PM”.			Storing unwanted callers
	7 MSAVEN a MOFFN			You can store up to 250 phone numbers in the call
				block list.
	Base unit
1		MMENUN#238
44		For assistance, please visit http://www.panasonic.com/help

TG954x(en)_0628_ver031.pdf 44

2013/06/28 12:35:32