Panasonic KX-TG9542 Link to cell feature, Pairing a cellular phone, Unpairing a cellular phone

Link to Cell

Link to cell feature

To use this feature, you must first pair and connect your cellular phones to the base unit (page 18). Your cellular phones must have Bluetooth wireless technology that is compatible with this product. This feature allows you to:

–make or answer cellular calls using your home phone (handset or base unit) with better reception.

–maximize the benefits of cellular services (such as free night and weekend calls, or cellular to cellular call plans) by utilizing unused peak minutes with your home phone.

–conserve the battery power of your cellular phone while the unit is on a cellular call. (We recommend charging your cellular phone during the cellular call as your cellular phone battery is being consumed.)

Important:

R You may pair a maximum of 4 cellular phones and 1 headset. However, the base unit allows only one Bluetooth to be active at a time.

R Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.

Pairing a cellular phone

Program this setting using either the base unit or one of the handsets.

Important:

R For more details and the list of compatible cellular phones, please visit our Web site: http://www.panasonic.com/link2cell

R Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone.

Handset / Base unit

1For CELL 1: MMENUN#6241

For CELL 2: MMENUN#6242

For CELL 3: MMENUN#6243

For CELL 4: MMENUN#6244

R After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.

2Your cellular phone:

While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.

R Depending on your cellular phone, it may ask you to enter the base unit PIN (default: “0000”).

3Wait until a long beep sounds.

R It may take more than 10 seconds to complete pairing.

R When the CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls.

4Proceed with the operation for your unit. Handset: MOFFN

Base unit: MEXITN

Note:

R Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phone’s operating instructions.

R Make sure you cancel your cellular phone’s current pairing if you want to pair it to the other line (page 18).

Unpairing a cellular phone

You can cancel the pairing of a cellular phone that is stored in the base unit.

Program this setting using either the base unit or one of the handsets.

Handset / Base unit

1For CELL 1: MMENUN#6111

For CELL 2: MMENUN#6112

For CELL 3: MMENUN#6113

For CELL 4: MMENUN#6114

2MbN: “Yes” a MSELECTN

R When the cellular phone is unpaired, the CELL indicator is turned off.

3Proceed with the operation for your unit. Handset: MOFFN

Base unit: MEXITN

18 For assistance, please visit http://www.panasonic.com/help

TG954x(en)_0628_ver031.pdf 18

2013/06/28 12:35:30