FASSEMBLY
WARNING
Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle.
Long Bushing | Snap Bushing |
Fork
| Center Axle |
| Steering Linkage |
3 | FRONT VIEW |
1
Wheel
• | While lifting the front end of the vehicle, fit the steering linkage onto |
| the fork. Make sure the center axle is toward the rear of the vehicle. |
• | Lower the front end of the vehicle. |
•Fit a long bushing, tapered end first, into the smaller indent in a wheel.
•Fit a snap bushing, narrow end first, into the larger indent in the wheel.
Steering Linkage
| Front Axle |
|
| Washer |
|
| Cap Nut |
|
2 | Wheel Assembly | Hubcap |
•Slide a washer onto a front axle on the steering linkage.
•Next, slide the wheel assembly, long bushing side first, onto the front axle.
•Fit a cap nut onto the end of the front axle.
•Tap the cap nut with a hammer to secure it on the front axle. Pull on the wheel to be sure it is secure on the front axle.
Hint: You may need the help of another adult to hold the steering linkage while you tap the cap nut.
•“Snap” a hubcap onto the center of the wheel.
•Repeat steps 1 and 2 to assemble the other wheel, long bushing, snap bushing, washer, cap nut and hubcap to the other front axle.
Steering Column
Power Button Wire
Cowling Large Hole
4 |
•Fit the steering column and power button wire into the large hole in the cowling. Make sure the steering column goes through the small slot inside the vehicle.
Hint: Before inserting the steering column, locate the small slot in the vehicle by looking into the large hole in the cowling.
8 | |
|
|