ASSEMBLYF
Rectangular Opening
Power
Button
Connector
Motor
Harness
Connector
5 | BOTTOM VIEW |
IMPORTANT! An electrical connection must be made for your vehicle to function properly. Please follow these instructions carefully.
•Carefully stand the vehicle on end.
•Reach inside the slot in the underside of the vehicle near the steering linkage and pull the power button connector out.
•Fit the power button connector into the motor harness connector.
Note: If the power button connector will not plug into the motor harness connector, turn it over and try again! Do not force the two connectors together.
End of Steering | Steering Linkage |
Column |
6
•Fit the end of the steering column through the hole in the steering linkage.
Steering Column Cap
7 | BOTTOM VIEW |
|
•Fit the steering column cap onto the end of the steering column .
•Insert a #8 x 3/4" screw through the large opening in the steering column cap and the hole in the steering column . Tighten the screw.
Hint: You may need to adjust the steering column cap to properly fit the screw.
• Turn the vehicle upright.
9 | |
|
|