FASSEMBLY
Dashboard
4 |
•Place the dashboard on the top side of the vehicle, as shown.
•Insert five #10 x 1" screws into the dashboard. Tighten the screws.
End of Steering Column
5/32" x 1½" Pin
PUSH
6 |
•While holding the steering wheel, grasp the steering column and push it up as far as it will go.
•Insert the 5/32" x 1½" pin through the hole in the end of the steering column.
Large Opening UP
Steering Wheel
Large Opening
Steering Column
Bend
Upright
5 |
•Position the steering wheel with the large opening UP.
•Position the steering column so that the bend is UP, as shown.
•Fit the steering column through the center hole in the steering wheel.
Steering Wheel Cap
Steering Wheel
PULL
7 |
•Now, pull the steering column down to fit the pin into the grooved area in the center of the steering wheel.
•Fit the steering cap into the center of the steering wheel. Be sure to align the notch in the steering wheel cap with the tab in the center of the steering wheel.
•Insert two #8 x ¾" screws into the steering wheel cap. Tighten the screws.
10 |
