ASSEMBLYF
Large Opening UP
Large Hole in
Dashboard
Steering Column
Bend Up
10
• Insert #8 x ¾" screw through the large opening in the steering column cap and the hole in the steering column. Tighten the screw.
8 |
• Insert the steering column (with steering wheel) into the large hole |
| Windshield Wiper | |
Large | Large | ||
in the dashboard. Make sure the large opening in the steering wheel | |||
and the bend in the steering column are UP. | Tab | Tab |
| Steering Column Cap | Slot |
|
| |
| End of Steering Column | Slot |
9 |
| |
Steering Linkage | 11 | |
|
| |
• Carefully, turn the vehicle over, keeping the steering wheel and | • Turn the vehicle upright. | |
steering column in place. | ||
• Fit the end of the steering column through the hole in the | • Position the windshield so that wipers face the front end of | |
steering linkage. | the vehicle. | |
• Fit a steering column cap on the end of the steering column and | • Insert and "snap" both large tabs on the windshield into the large | |
hold it in place. | slots in the dashboard. | |
|
| • Pull up on the windshield to be sure it is secure. |
11 |
