ASSEMBLYF
WARNING
Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle.
Seat Tabs
Slots
1 |
• Fit both tabs on the front end of the seat into the slots in the vehicle.
#10 x 1" Screw
2 |
•Insert a #10 x 1" screw into the back edge of the seat. Tighten the screw.
Roll Bar
Hole
Hole
3 |
•Position the roll bar so that it bends toward the back end of the vehicle.
•Insert and "snap" the roll bar into the large holes in the top side of the vehicle, as shown.
•Pull up on the roll bar to be sure it is secure.
9 |
