Troubleshooting Guide
Problem | Cause | Solution | |
No image on the TV | TV or VCR/DVD is not set to | Press the channel down button on the VCR/DVD or TV and | |
| proper input | check for an INPUT channel below channel 2. | |
|
| Use the menu system on your TV or VCR/DVD to fi nd INPUT or | |
|
| SOURCE. Change to INPUT or SOURCE. | |
|
|
| |
|
| Refer to your TV's or VCR/DVD’s instruction manual. | |
|
|
| |
| Batteries in the pony/receiver | Replace the batteries in the pony with three, new “AAA” (LR03) | |
| are weak or dead | alkaline batteries and the receiver with three new “C” (LR14) | |
|
| alkaline batteries. |
|
| Pony battery compartment | Fully tighten both screws in the battery compartment door. | |
| door is loose |
|
|
| No wireless connection (L.E.D. | Distance between pony and receiver must be | |
| on receiver is off) | Receiver must be placed fl at on ground level or no more than | |
|
| ||
|
| 5 feet off the ground. |
|
|
|
| |
|
| Make sure receiver is centered in front of pony. When baby | |
|
| spins on pony, there will be a 160° range of wireless connection. | |
|
| Make sure you have a clear path between the pony and the | |
|
| receiver. Do not place the receiver in a closed cabinet. | |
|
|
| |
|
| Make sure receiver power is on. Slide the power switch on . | |
|
| Receiver is in sleep mode (after 1 hour of | |
|
| button on the receiver to wake it up. | |
|
|
| |
|
| Receiver | |
|
| input jacks. |
|
| No wireless connection | Pony power is off or it is in Stand Alone mode. Slide the power/ | |
| (L.E.D. on receiver is on but | mode switch to TV Connect | . |
| not fl ashing) | Pony is in sleep mode (after 3 mintes of | |
|
| ||
|
| on the pony to wake it up. |
|
Low battery symbol | Batteries in the receiver | Replace the batteries in the receiver with three new “C” (LR14) | |
appears on TV screen | are weak | alkaline batteries. |
|
|
|
| |
Image is stretched or distorted | TV aspect ratio set incorrectly | This product is designed for use with a 4:3 aspect ratio (display | |
on a wide screen TV |
| setting) and you should see black bars on the sides of the | |
|
| image. For best picture, do not use a 16:9 aspect ratio | |
|
| (stretched) wide screen setting. For more information on chang- | |
|
| ing this setting, refer to your TV owner’s manual. | |
19
