ASSEMBLY
Wrench
Lock Nut
3
End of Steering
Column
Rounded Side Up
Pull Up
5 | SIDE VIEW |
|
•Turn the vehicle upright.
•Pull the handlebar up to be sure the steering column is secure.
•If you can remove the steering column, you have not assembled the steering column correctly. Please refer back to Assembly steps
•Fit the lock nut (rounded side up) on to the end of the steering column.
•Tighten the lock nut firmly using the closed end of the wrench.
Steering
Column
Cap
4
•“Snap” the steering column cap over the steering column and onto front wheel assembly.
Handlebar Motor
Connector Connector
6 | TOP VIEW |
|
•Plug the handlebar connector into the motor connector.
•Replace the seat (refer to step 6 on page 13).
9 |
