Fisher SRT-7168 NOTES:, SERIES RECORDING, Continous Loop Recording Setup, Loop recording connection (example with 2 VCRs)

SERIES RECORDINGContinous Loop Recording Setup

It is possible to configure at least two this VCR for continous loop recording.

Under loop recording when the recording finishes on the first unit, the new recording will start on the second unit. When the recording finishes on the second unit, recording will start on the first unit.

œThe SERIES OUT terminal of VCR No.2 and the SERIES IN terminal No.1 should be connected (See diagram).

œSet the TAPE SELECT switch according to the duration of the tape used.

1Press the REC/PLAY SPEED l (or j) button to set the recording speed mode.

2Set the following items as indicated.

Item	VCR No.1	VCR No.2
Cassette tape	Loaded	Loaded
Operation mode	Stop	Stop
REPEAT REC switch	OFF	OFF
Counter memory	Canceled	Canceled
“OUTPUT” (in (SET UP	SERIES	SERIES
1) menu)
“TAPE END MODE” (in	REW	REW
(SET UP 3) menu)
“SERIES REC IN” (in	Y (YES)	Y (YES)
(SET UP 3) menu)
Timer recording	OFF (not set)	OFF (not set)
Security lock	Canceled	Set

Loop recording connection (example with 2 VCRs)

Video camera

3Press the REC button on VCR No.1.

øRecording will start in series recording mode.

4Set the security lock on VCR No.1.

NOTES:

œThe “TAPE END MODE” in (SET UP 3) menu should be set to “REW” for both units without fail.

œIn loop recording mode, the tape will be re-recorded over. If you need to keep the recorded infomation, please eject the tape after recording is complete and insert a new tape.

Monitor TV

		To	To VIDEO IN jack		To
VCR No.1		VIDEO IN	VCR No.2		VIDEO OUT
		jack			jack
A RS485	B		A RS485	B
OFF	232 OFF	PUSH	OFF	232 OFF	PUSH
		OPEN			OPEN
	AUDIO	VIDEO		AUDIO	VIDEO
	REMOTE MIC IN IN OUT	IN OUT		REMOTE MIC IN IN OUT	IN OUT
AC IN ~			AC IN ~
RS232C			RS232C
	To			To	To COM
SERIES OUT			SERIES OUT
	terminal	To		terminal	terminal
	To	VIDEO OUT		To
		jack
SERIES IN			SERIES IN
terminal			terminal
		To COM
		terminal

26 English