Fisher VPC-SX560EX - page 27

Installing the Batteries
1Set the main switch to “MONITOR OFF” or “CAMERA.”
2Close the lens cover.
3Open the battery compartment cover on the bottom of
the digital camera.
œPush the button on the compartment cover and slide it
outward to open it.
4Insert two recharged nickel metal hydride batteries in
the battery compartment.
œMake sure the polarity ((+), (–)) of the batteries is as
indicated in the battery compartment.
5Close the battery compartment cover.
œSlide the compartment cover in the direction of the arrow until it clicks.
NOTE
œBattery power is still used even when the digital camera is turned off. It is recommended that
you remove the batteries from the digital camera when it is not being used. However, when the
batteries are removed for a long period, the date and time settings may be cleared. When
reinstalling recharged batteries, recheck the date and time settings (see page 41).
PLAY CAMERA
MONITOR OFF
Main switch
SX114/EX, /E, /U (VPC-SX560EX, VPC-SX560E, VPC-SX560 GB) Wed. Nov., 15/2000
English 24