TURNING THE POWER ON/OFF

Turning the Power On

Follow the steps indicated below when capturing images or when playback images on the LCD
monitor.

To capture images

1Set the main switch to “MONITOR OFF” or “CAMERA.”
“MONITOR OFF”: To not use the LCD monitor.
“CAMERA”: To use the LCD monitor.
2Open the lens cover.
œThe power is turned on.
œThe stand-by indicator lights green in the viewfinder
window.
œIf the main switch was set to “CAMERA” in step 1, the
LCD monitor will turn on and an image will appear.

To playback images

1Set the main switch to “PLAY.”
œThe power is turned on.
œAn image appears in the LCD monitor.
œImages can be played back whether the lens cover is
opened or closed. However, to protect the lens, we
recommend that you keep the cover closed.
HELP
If “NO CARD” appears
œIf no card is installed in the digital camera, then “NO CARD” will appear in the LCD monitor. Be
sure to install a card before using the digital camera (see page 25).