Fishman LDS9000 manual Glossary

Glossary

FOOT	Setting for using a foot pedal to activate dispensing cycle
HAND	Setting for using finger switch to activate a dispense cycle
SYR	Syringe— barrel reservoir selection
DIA	Length—user-defined syringe inside length from ears to bottom in
	millimeters
V	Volume—Volume to be dispensed, in cubic centimeters
R	Dispense Rate—The rate, in cubic centimeters per second, at
	which you want to dispense the fluid
PRGM	Program key to enter or exit at AUTO DISPENSE PROGRAM
	MANAGER
ENTER	Key to activate desired parameter
NEXT	Key to advance to the next screen without changing the exiting
	parameters
SYRINGE
ATTACHMENT	The ideal position for the ears of the barrel reservoir after locking
	it into place, is flush up against the retaining plate. Note: Always
	attach a new barrel reservoir with the tip cap on.
PRIMING
THE SYSTEM	Eliminates any trapped air between the barrel reservoir and
	needle. Always prime the system at start up.
PARAMETER
LIMITS	If you want to know the min., max, or high and low values of
	parameters for a given syringe, type in 999 at the prompt and
	press the ENTER key. View the display; it will flash the values
	on the screen and then return.
RETRACT	When you are in program mode and you change the
	EXTEND/RETRACT switch to RETRACT, the system will
	prompt you to hit the ENTER key or flip the switch back to
	EXTEND. This is a safety precaution. If you retract with the
	PosiLokTM piston attached, the barrel reservoir will fill up with air
	from the open end. Before you use the retract feature, be sure
	you remove your barrel reservoir. When retracting the lead screw
	in manual mode, all you have to do is flip the
	EXTEND/RETRACT switch to RETRACT. The PosiLokTM
	piston will retract for as long as the foot pedal is depressed.

28