J1 User Guide | 21/6/05 1:16 pm Page 7 |
Never remove the cup during brewing as this may cause burns.
Never open the Pack Door during brewing cycle as this may cause burns.
Do not move the appliance while a cup or mug is on the Cup Stand. This may cause burns.
ELECTRICAL SUPPLY AND CORD
Never do anything that might cause damage to the Cord or Plug (such as modifying, bending, stretching or twisting them or placing hot or heavy objects on them). If the appliance is used when damaged, electrical short circuit or fire may result. If in need of repair please contact the FLAVIA® Customer Service Team.
Clean Plug regularly, a build up of dust on the Plug will attract condensation, which could lead to cable damage resulting in fire. Remove the Plug and clean with a dry cloth.
Make sure the Plug is correctly inserted into the outlet. A loose connection or damaged Plug may cause electric shock or generate heat resulting in fire.
120 V outlet must not be used with other appliances, the heat generated may result in fire.
Never plug or unplug the appliance with wet hands. This may result in electric shock.
Remove the plug from the socket only when the appliance is not in use. Deteriorating insulation may result in electric shock and/or fire.
When unplugging the appliance, always pull by the Plug – NOT THE CORD!
POLARIZED PLUG
This appliance is fitted with a polarized Plug (one blade is wider than the other) as a safety feature.
To reduce the risk of electric shock:
Fit the Plug into the outlet in the correct way
If the Plug does not properly fit in to the outlet at first, reverse it.
If the Plug still does not fit, contact a qualified electrician.
Do not attempt to modify the Plug in any way.
SAVE THESE SAFETY INSTRUCTIONS.
TROUBLE SHOOTING GUIDE
If you experience a problem with this appliance, you may find a solution in the table below. If the table below does not provide a solution to your problem or if you have any additional questions please see the section titled ASSISTANCE on page 1 of this booklet.
Problem | Solution | |
|
| |
The appliance does not operate | Check that the Plug is correctly inserted in to the outlet. | |
| Check that the Power switch is in the ON position. | |
|
| |
The appliance does not brew | The appliance must be primed with water before using it for | |
beverages when used for the | the first time, so that the boiler will be completely filled | |
first time | with water. Prime the appliance (see PREPARING YOUR | |
| APPLIANCE FOR USE on page 6) before brewing beverages. | |
|
| |
The 3 Indicator Lights flash | Check that the Water Reservoir is correctly fitted to the | |
quickly | machine and/or filled to the MAX indication line. | |
|
| |
The 3 Indicator Lights flash | The appliance is heating the water to the optimum | |
slowly | temperature for brewing. This may take up to 90 seconds. | |
|
| |
The 3 Indicator Lights are off | The appliance has seen no activity for at least 40 minutes | |
and has gone in to “Power Save” mode. To power up the | ||
| ||
| machine press any Selection Button or open the Pack | |
| Door. The machine will now | |
| optimum temperature. | |
|
| |
The right Indicator Light is | This will occur when the first pack of a | |
flashing | is complete. Insert the 2nd pack and press the right | |
| button to complete your beverage. If you choose to | |
| cancel, simply press the left or middle button to do so. | |
|
| |
The Indicator Lights display a | Contact the FLAVIA® Customer Service Team (see | |
sequence other than those | ASSISTANCE section on page 1) | |
mentioned above |
| |
|
| |
The Pack Door cannot be closed | Check that the Pack Door is correctly fitted to the | |
| appliance. Please note: When closing the Pack Door with | |
| a pack present, you will feel some resistance, this is only | |
| the seal of the pack being pierced and is perfectly | |
| normal. Please check that nothing is blocking the “latch.” | |
|
| |
The pack cannot be pierced | Check that the pack is correctly inserted, and that the | |
| Pack Door is correctly fitted to the appliance. | |
|
| |
The appliance makes a “pop” | Occasionally a “pop” may be heard at the start of a | |
sound shortly after the Selection | beverage being brewed, this is normal and is confirmation | |
button is pressed | of the optimal freshness of your beverage. | |
|
| |
The amount of beverage | The boiler and internal parts of the machine have become | |
dispensed is repeatedly too small | blocked with scale. See the DESCALING YOUR APPLIANCE | |
and/or is dispensing too slowly | section on page 15. | |
|
|
3 | 16 |
