J1 User Guide | 21/6/05 1:16 pm Page 9 |
DESCALING YOUR APPLIANCE
Regular descaling will prolong the life of your appliance and will ensure optimal brewing performance for the life of your brewer. If the machine is used twice per day on average, the appliance must be descaled at least once every 3 months.
Remove the Water Filter from the Water Reservior if fitted.
Fill the Water Reservoir up to the MAX indication line with white wine vinegar or descaler and water, according to the descaler manufacturers guidelines. Fit the Water Reservoir to the machine.
Use only citric acid based descaler.
Remove the drip tray and place a bowl with a capacity of at least 45 fl.oz under the Brew Head.
Switch the appliance on and wait until the 3 indicator lights are lit continuously.
Following the process BREWING YOUR BEVERAGES (from page 11), insert a USED pack into the Brew Head.
If available, please insert a used instant pack e.g. Choco or Creamy
Topping.
Adjust the Volume Control to the maximum setting.
1.Press the MIDDLE selection button (coffee/tea). Allow the machine to operate.
2.Repeat this until the water reservoir is empty.
3.Remove, empty and replace the bowl on the appliance.
Repeat steps 1 - 3, three times with new white wine vinegar or a new mixture of descaler.
Empty the Water Reservoir to remove any remaining descaler.
Flush the machine with fresh water following the steps 1 - 3, three times.
The appliance has no other
TABLEOFCONTENTS
Features of your Appliance
Preparing your Appliance for use
Getting the most from your Appliance
Filling your Appliance with water
Brewing your Beverages
Brewing
Cleaning and Maintenance of your Appliance
Descaling your Appliance
Warranty
15 | 4 |
