Fluke 105B, 99B manual Accessory Information

Appendixes 9 - 13

Safety

Designed to Installation Category III per IEC 1010, CSA C22.2 (including approval), and UL1244 (including approval) for 600V measurements on industrial power distributions systems.

MAX. Input voltage on	300V rms, 600V rms with
INPUT A or INPUT B		10:1 probe
MAX. Input voltage on EXTernal input		300 V rms
Surge Protection	4 kV, 6 kV with 10:1 probe
per IEC 664 and ANSI/IEEE C62.41 test method
Maximum Isolation to Earth	600V rms from any terminal
Optical Interface	Optically Isolated to 600V rms

ACCESSORY INFORMATION

Passive Probe 10:1 (PM8918)

Attenuation: x10

Useful Bandwidth: 100 MHz

Input resistance: 10 MΩ

Input capacitance: 15 pF

Max. V x Hz: 109

Cable length: 1.5m

Max. signal Voltage: 600V rms

Max. surge Voltage: 6 kV

Max. Voltage to Ground: 600V rms

Double insulated per IEC1010-1 for 600V.

Optically Isolated RS-232 Adapter /Cable (PM9080/001)

Serial Printer Interface	.......................EPSON FX/LQ,
	Deskjet Thinkjet, Deskjet, Laserjet
	Print screens and waveforms or
	log meter and cursor readings
Full PC Interface	.......................Transfer setups,
	waveforms, measurements, etc.
Capture Screen	With FlukeView™ software

(optional for Fluke 92B, 96B and 99B)