Fluke 9112A Thermal Ceramics

Thermal Ceramics

MATERIAL SAFETY DATA SHEET

MSDS No: 350 Date Prepared: 03/24/1992 Current Date: 7/26/2002

Last Revised: (03/20/2002)

1. PRODUCT AND COMPANY IDENTIFICATION

Product Group: ALKALINE EARTH SILICATE (AES) WOOL PRODUCT

Chemical Name: Calcium-Magnesium-SilicateWool or Calcium-Magnesium-Zirconium-Silicate Wool

Synonyms: CMS, Synthetic Vitreous Fiber (SVF), Man-made Vitreous Fiber (MMVF), Man-made Mineral

Fiber (MMMF)

Trade Names: Superwool™ (*) Bulks, Blankets, Mats and Modules (ALL GRADES)

Manufacturer/Supplier: Thermal Ceramics Inc.

P. O. Box 923; Dept. 300

Augusta, GA 30903-0923

ForProduct Stewardship and Emergency Information -

Hotline: 1-800-722-5681

Fax: 706-560-4054

For additional MSDSs and to confirm this is the most current MSDS for the

product,visit our web page [www.thermalceramics.com] or call our automated

FaxBack: 1-800-329-7444

* Superwool™ is a trademark ofThe Morgan Crucible Company plc

2. COMPOSITION/INFORMATION ON INGREDIENTS

INGREDIENT &

CASNUMBER % BY WEIGHT OSHA PEL ACGIH TLV

Calcium-Magnesium-Silicate Mixture(1) 100 15 mg/m3 (total dust) 10 mg/m3 (inhalable dust)

329211-92-9 5 mg/m3 (respirable dust) 3 mg/m3 (respirable dust)

OR

Calcium-Magnesium-Zirconium-Silicate Mixture(1) 100 15 mg/m3 (total dust) 10 mg/m3 (inhalable dust)

308084-09-5 5 mg/m3 (respirable dust) 3 mg/m3 (respirable dust)

(1) May contain alumina and titania as minor constituents

(See Section 8 "Exposure Controls / Personal Protection" for exposure guidelines.)

3. HAZARDS IDENTIFICATION

• May cause temporary, mild mechanical irritation to the eyes, skin, nose and/or throat.

• Pre-existing skin and respiratory conditions may be aggravated by exposure.

Page 1 Of 7

Contents

Main Page Table of Contents Page Page 1 Before You Start 1.1 Symbols Used 1.2 Safety Information 1.2.1 WARNINGS Page 1.2.2 Cautions 1.3 Authorized Service Centers Page Page 2 Introduction 3 Specifications and Environmental Conditions 3.1 Specifications 3.2 Environmental Conditions 3.3 Warranty Page 4 Installation 4.1 Unpacking & Inspection 4.2 Location 4.3 Dry-out Period 4.4 Power 4.5 Equilibration Block Assembly Installation 4.6 Probe Installation Page Page 5.1.2 Over Temperature Cutout 5.1.3 Power and Heater Switches 5.2 Heater Assembly 5.2.1 Equilibration Block Assembly 5.2.2 Temperature Control and Cutout Sensor 5.3 Back View 5.3.1 The Power Cable 5.3.2 Nomenclature 5.3.3 Fuses 6 Operation 6.1 Overview 6.2 Operating the Furnace Page 7 Digital Communication Interface Page 8 Maintenance Page MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION / INFORMATION ON INGREDIENTS 3. HAZARDS IDENTIFICATION EMERGENCY OVERVIEW Page 4. FIRST AID MEASURES 5. FIRE FIGHTING MEASURES 6. ACCIDENTAL RELEASE MEASURES 7. HANDLING AND STORAGE 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Page 9. PHYSICAL AND CHEMICAL PROPERTIES 10. STABILITY AND REACTIVITY 11. TOXICOLOGICAL INFORMATION 12. ECOLOGICAL INFORMATION 13. DISPOSAL CONSIDERATIONS 14. TRANSPORT INFORMATION 15. REGULATORY INFORMATION 16. OTHER INFORMATION Page Page Thermal Ceramics 1. PRODUCT AND COMPANY IDENTIFICATION Page 1 Of 7 2. COMPOSITION/INFORMATION ON INGREDIENTS 3. HAZARDS IDENTIFICATION 4. FIRST AID MEASURES 5. FIRE FIGHTING MEASURES Page 2 Of 7 6. ACCIDENTAL RELEASE MEASURES 7. HANDLING AND STORAGE 8. EXPOSURE CONTROLS/PERSONAL PROTECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Page 3 Of 7 10. STABILITY AND REACTIVITY 11. TOXICOLOGICAL INFORMATION Page 4 Of 7 12. ECOLOGICAL INFORMATION 13. DISPOSAL INFORMATION 14. TRANSPORT INFORMATION 15. REGULATORY INFORMATION Page 5 Of 7 16. OTHER INFORMATION Page 6 Of 7 Page 7 Of 7