Fluke 9112A 4. FIRST AID MEASURES, 5. FIRE FIGHTING MEASURES, 6. ACCIDENTAL RELEASE MEASURES, 7. HANDLING AND STORAGE

MATERIAL SAFETY DATA SHEET

MSDS No: 350 Date Prepared: 03/24/1992 Current Date: 7/26/2002

Last Revised: (03/20/2002)

4. FIRST AID MEASURES

RESPIRATORY TRACT (nose and throat) IRRITATION

If respiratory tract irritation develops, move the person to a dust free location. See Section 8 for additional measures to

reduce or eliminate exposure.

EYE IRRITATION

If eyes become irritated, flush immediately with large amounts of lukewarm water for at least 15 minutes. Eyelids

should be held away from the eyeball to ensure thorough rinsing. Do not rub eyes.

SKIN IRRITATION

If skin becomes irritated, remove soiled clothing. Do not rub or scratch exposedskin. Wash area of contact

thoroughly with soap andwater. Using a skin cream or lotion after washing may be helpful.

GASTROINTESTINAL IRRITATION

If gastrointestinal tract irritation develops,move the person to a dust free environment.

- If symptoms persist, seek medical attention. -

NOTE TO PHYSICIANS

Skin and respiratory effects are the result of temporary, mild mechanical irritation; fiber exposure does not result in

allergic manifestations.

5. FIRE FIGHTING MEASURES

NFPACodes: Flammability: _0_ , Health: _1_ , Reactivity: _ 0_ , Special:_ 0_

NFPA UnusualHazards: None

Flammable Properties: None

Flash Point: None

Hazardous Decomposition Products: None

Unusual Fire and Explosion Hazard: None

Extinguishing Media: Use extinguishing media suitable for type of surrounding fire.

6. ACCIDENTAL RELEASE MEASURES

SPILL PROCEDURES

Avoid creating airborne dust. Dust suppressing cleaning methods such as wet sweeping or vacuumingshould be used

to clean the work area. If vacuuming, the vacuum should be equippedwith a HEPA filter. Compressed air or dry

sweeping should not be used for cleaning.

7. HANDLING AND STORAGE

STORAGE

Store in original factory container in a dryarea. Keep container closed when not in use.

HANDLING

Limit use of power tools unless in conjunction with localexhaust. Use hand tools whenever possible. Frequently clean

the work area with HEPA filtered vacuum or wet sweeping to minimize the accumulation of debris. Do not use

compressedair for clean-up.

EMPTY CONTAINERS

Do not reuse the container.