Carton Contents
| Shoulder | Cable |
| Management | |
| Harness Location | |
|
| |
|
| Electric Cable with |
| Handle | moulded on plug |
| Clamp | |
| button | |
|
| |
Instruction | Cable |
|
Manual | Management |
|
|
| Adjustable |
| Switch | Shoulder |
| Handle | Harness |
Hexagon |
|
Drive Tool | Guard (with |
| bolt and nut) |
| Steady |
| Handle |
IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product.
IF ANY PARTS ARE MISSING CONTACT:-
Husqvarna Outdoor Products Customer Service Department direct:-
Telephone : 0870 609 1901 | Fax : 0870 609 1902 |
Safety
If not used properly this product can be dangerous! This product can cause serious injury to the opera- tor and others, the warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this product. The operator is responsible for following the warning and safety instruc- tions in this manual and on the product.
Explanation of Symbols on the product
Warning
Read the user instructions carefully to make sure you understand all the con- trols and what they do.
Wear eye protection
To avoid the possibility of electric shock, do not use in damp or wet conditions.
10m
Keep others, including children, pets and bystanders outside the 10 metre hazard zone. Stop the product immediately if you are approached.
Switch off! Remove plug from mains before adjusting, cleaning or if cable is entangled or damaged.
Warning: The cutting line continues to rotate after the machine has been switched off.
General
1.Never allow children or people unfamiliar with these instructions to use the product. Local regulations may restrict the age of the operator.
2.Only use the product in the manner and for the functions described in these instructions.
3.Never operate the product when you are tired, ill or under the influence of alcohol, drugs or medicine.
4.The operator or user is responsible for accidents or hazards occurring to other people or their property.
5.This product is intended to be used by a standing
operator, primarily for cutting grass and other ground level plants.
Electrical
1.The British Standards Institute recommend the use of a Residual Current Device (R.C.D.) with a tripping current of not more than 30mA. Even with a R.C.D. installed 100% safety cannot be guaranteed and safe working practice must be followed at all times. Check your R.C.D. every time you use it.
2.Before use, examine cable for damage, replace it if there are signs of damage or ageing.