Maintenance
•WARNING
Disconnect from the mains electricity sup- ply, before attempting any maintenance or adjustment. Cutting head continues to rotate after the trimmer has been switched off. Keep fingers and hands clear of the line cutter on leading edge of guard.
Caring for your Product
1.Disconnect from the mains electricity supply.
2.Never clean your product with water, cleaning fluids, or solvents, just remove debris with a suitable tool, a soft brush or dry cloth.
3.Using a soft brush, clean around the inside of the safety guard, the cutting head (W) and the motor housing air vents. (X1)
4.Remove the cutting head. Using a soft brush,
remove any grass clippings from around the cutting head shaft (Y).
5.Inspect the product carefully, especially the parts of the cutting head.
6.If your product is damaged in any way con-
tact your local approved service centre.
•Never use a damaged product.
7.Store in a cool, dry place and out of reach of children.
Cable Storage
1.Your mains cable can be stored on the prod- uct as illustrated in Fig Z1.
2.Wind cable carefully to avoid kinking.
3.To release the cable press the button and the hook will drop down (Z2).
4.Push cable hook fully back into position.
Hexagon Drive Tool Storage
1.Your Hexagon Drive Tool can be stored in the Handle Clamp as illustrated in Fig Z3.
W
Y
Z2
X
1
Z1
Z3
