Fault Finding Chart
WARNING Disconnect from the mains electricity supply before attempting any maintenance or adjustment.
FAULT
CHECK | ACTION |
LINE NOT FEEDING
OR
LINE TOO SHORT
OR
TRIMMER VIBRATES
Is the line fed out and visible? Has line been removed from cleat?
Is the automatic line feed work- ing?
No
No
Remove cap and spool, free line
and
The line may be jammed on the spool. Rewind line to remove crossed loops. Check that line is in correct section of spool.
CONTINUOUS CLATTER-
ING NOISE
Has the motor reached full speed before use?
Has too much line been fed out?
Is the line cutter missing from the safety guard?
No |
| Allow the motor to reach full speed |
| before use. | |
|
| |
|
|
|
|
|
|
Yes |
| Rewind line |
| ||
|
|
|
|
| Contact your local approved |
|
| Service Centre or Husqvarna |
Yes |
| |
| Outdoor Products Customer | |
|
| Service. |
LINE SNAPS CONTINU-
OUSLY
Are you using the product cor- rectly?
Is the line jamming on the spool?
? Yes
Only use tip of nylon line to trim.
SEE “Use”
Rewind the line on the spool, if symptoms still persist, change spool and line.
IF NONE OF THE ABOVE OR IF FAULT PERSISTS
Contact Husqvarna Outdoor Products Customer Service Telephone : 0870 609 1901
Environmental Information
•Awareness of the environment must be considered when disposing of
•If necessary, contact your local authority for disposal information.
The symbol on the product or on its packaging indi- cates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electron- ic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could other- wise be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please contact your local council office, your household waste disposal service or the shop where you purchased the product.