Safety cont’
use. Many accidents are caused by poorly maintained power tools.
f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g)Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
5.Service
a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Hedge trimmer safety warnings:
•Keep all parts of the body away from the cutter blade. Do not remove cut material or hold mate- rial to be cut when blades are moving. Make sure the switch is off when clearing jammed ma- terial. A moment of inattention while operating the hedge trimmer may result in serious personal injury.
•Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or stor- ing the hedge trimmer always fit the cutting de- vice cover. Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades.
•Keep cable away from the cutting area. During operation the cable may be hidden in shrubs and can be accidentally cut by the blade.
Additional Safety Recommendations
Work area safety
1.Never allow children or people unfamiliar with these instructions to use the hedge trimmer. Local regula- tions may restrict the age of the operator.
2.Only use the hedge trimmer in the manner and for the functions described in these instructions.
3.The operator or user is responsible for accidents or hazards occurring to other people or their property.
Electrical safety
1.The British Standards Institute recommend the use of a Residual Current Device (R.C.D.) with a tripping current of not more than 30mA. Even with a R.C.D. installed 100% safety cannot be guaranteed and safe working practice must be followed at all times. Check your R.C.D. every time you use it.
2.Before use, examine cable for damage, replace it if there are signs of damage or ageing.
3.Do not use the hedge trimmer if the electric cables are damaged or worn.
4.Immediately disconnect from the mains electricity supply if the cable is cut, or the insulation is dam- aged. Do not touch the electric cable until the elec- trical supply has been disconnected. Do not repair a cut or damaged cable. Replace it with a new one.
5.Your electric cable must be untangled, tangled ca- bles can overheat and reduce the efficiency of your
hedge trimmer.
6.Always switch off at the mains before disconnecting any plug, cable connector or extension cable.
7.Switch off, remove plug from mains and examine electric supply cable for damage or ageing before winding cable for storage. Do not repair a damaged cable, replace it with a new one. Use only Flymo re- placement cable.
8.Always wind cable carefully, avoiding kinking.
9.Use only on AC mains supply voltage shown on the product rating label.
10.Our products are double insulated to EN60745. Under no circumstances should an earth be con- nected to any part of the product.
Personal safety
1.Always wear suitable clothing, gloves, and stout shoes.
2.Thoroughly inspect the area where the hedge trim- mer is to be used and remove all wires and other for- eign objects.
3.Before using the machine and after any impact, check for signs of wear or damage and repair as necessary.
4.Always ensure the hand guard supplied is fitted be- fore using the hedge trimmer. Never attempt to use an incomplete hedge trimmer or one with an unau-
thorised modification.
Power tool use and care
1.Know how to stop the hedge trimmer quickly in an emergency.
2.Never hold the hedge trimmer by the guard.
3.Never operate the hedge trimmer with damaged guards or without guards in place.
4.Do not use stepladders whilst operating the hedge trimmer.
5.Remove the plug from the mains :-
-before leaving the hedge trimmer unattended for any period;
-before clearing a blockage;
-before checking, cleaning or working on the appli- ance;
-if you hit an object. Do not use your hedge trimmer until you are sure that the entire hedge trimmer is in a safe operating condition;
-if the hedge trimmer starts to vibrate abnormally. Check immediately. Excessive vibration can cause injury.
-before passing to another person.
Maintenance and storage
1.Keep all nuts, bolts and screws secure to be sure the hedge trimmer is in safe working condition.
2.Replace worn or damaged parts for safety.
3.Be careful during adjustment of the hedge trimmer to prevent entrapment of the fingers between moving blades and fixed parts of the machine.
4.Store in a cool dry place and out of reach of children. Do not store outdoors.
