4
Starting and Stopping
Starting
1.Hold as illustrated in Fig D.
2.To start, press the
switch lever.
Stopping
1.To stop your lawnmower, release the switch lever.
D
Switch lever
Adjusting the Cutting Height
•THERE ARE 2 CUTTING HEIGHTS (E & F)
•Height of cut is adjusted by turning over the cutting head.
•Disconnect from the mains electricity sup- ply and wait until the cutting head has stopped rotating. Turn your lawnmower upside down.
•To Remove the Cutting Head and Fan (G)
Hold the fan firmly and twist the cutting head
•Inspect for damage and clean as neces- sary before replacing the fan and the cut- ting head
•To Refit the Fan and the Cutting Head (H)
Replace the fan as illustrated. Replace the cutting head, adjusting the height of cut as required. Hold the fan firmly and twist the cutting head clockwise, as illus- trated.
•IMPORTANT
ENSURE FAN AND CUTTING HEAD ARE CORRECTLY LOCATED
E HIGHEST This symbol visible
F | LOWEST |
| This symbol visible |
G | 1 |
| 3 |
| 2 |
H |
|
| 1 |
| 3 |
| 2 |