|
|
| 6 |
| Caring for your Lawnmower |
| |
At the End of the Mowing Season | M | N | |
1. | Replace plastic cutters, bolts, nuts or screws, if |
|
|
| necessary. |
|
|
2. | Clean your lawnmower thoroughly. |
|
|
3. | Ask your local Service Centre to clean the air filter |
|
|
| thoroughly and carry out any service or repairs |
|
|
| required. |
|
|
4. | Make sure that the electric cable is coiled properly. |
|
|
Carrying your Lawnmower |
|
| |
Hold as illustrated in Figure M. Ensure the cutters |
|
| |
are facing away from you. |
|
| |
Storing your Lawnmower |
|
| |
Store in a dry place where your lawnmower is pro- |
|
| |
tected from damage. |
|
| |
Your product can be stored in a hanging position. |
|
| |
• | The back of the handle has a hanging slot for |
|
|
| storing the product on the wall. |
|
|
1. | Hang the product from a hook or suitable screw as |
|
|
| illustrated in Figure N. |
|
|
| Fault Finding Hints |
| |
Fails to Operate
1Is the Power Turned On?
2Check the fuse in the plug, if blown replace.
3Fuse continues to blow?
Immediately disconnect from the mains electric- ity supply and consult your local approved Service Centre.
Poor Flotation
1.Disconnect from the mains electricity supply.
2.Clean the underside of the hood and the fan blades.
3.Raise to a higher height of cut. See Adjusting the Cutting Height.
4.If poor flotation persists?
Disconnect from the mains electricity supply and consult your local approved Service Centre.
Excessive Vibration
1.Disconnect from the mains electricity supply.
2.Replace broken or missing plastic cutters.
3.Check plastic cutters and cutting head are fitted cor- rectly and securely located.
4.If vibration persists?
Immediately disconnect from the mains electric- ity supply and consult your local approved Service Centre.
Service Recommendations
1.We strongly recommend that your product is serviced at least every twelve months, more often in a professional application.
2.Always use genuine Flymo Spare Parts.
3.Prepacked spares are available from most Electrolux Outdoor Products stockists.
4.Your product is uniquely identified by a silver and black product rating label.
5.If you have a problem with your machine contact your local Approved Service Centre ensuring you have full details of your product as described on the product rating label.
6.Should it be necessary for work to be carried out by your Service Centre, it is important to take your complete machine including cable and any extension cables used.
A network of specialist dealers can be found in your local Yellow Pages. To obtain service on your Flymo product simply telephone or visit your local Service Centre. Should you require service under the terms of our guarantee the Service Centre will require proof of purchase.
All of the centres listed stock genuine Flymo Spare Parts. NOTE: Our Service Repairers act on their own behalf and are not empowered to commit or legally bind Electrolux Outdoor Products in any manner whatsoever.
Environmental Information
Electrolux Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to compa- ny procedures, and with the potential for recycling at the end of the products’ life.
•Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.
•Awareness of the environment must be considered when disposing of
•If necessary, contact your local authority for disposal information.
