Flymo Electric Lawn Trimmer manual Assembly Instructions

3

CABLES - IMPORTANT				3. IMPORTANT!
•	Use only 1.00mm2 size cable up to 30 metres length
	maximum.					E
Maximum rating :						L	OR
							RED
1.00mm		2	size cable, 10 amps 250 volts AC.				F BROWN
					BLACK		U
THE MINIMO IS SUPPLIED WITH AN ELECTRIC MAINS							S
					BLUE		E
					OR	N
CABLE WIRED DIRECTLY INTO THE PRODUCT.
1.	Flymo Mains Cables and Extension Cables are available
	from your local Electrolux Outdoor Products Service Centre.
2.	Do not wire an extension cable directly to your product			The wires in the mains lead are coloured in accor-
	yourself. Please contact your local Electrolux Outdoor			dance with the following code:
	Products Approved Service Centre for further informa-			BLUE	-	NEUTRAL
	tion on the connectors and kits available.			BROWN	-	LIVE
3.	Only use extension cables specifically designed for			The wire which is coloured BLUE must be connect-
	outdoor use.			ed to the Terminal which is marked with the letter 'N'
CONNECTORS - IMPORTANT				or coloured BLACK.
•	Flymo connectors are suitable for use with 2 core			The wire which is coloured BROWN must be con-
	cable only. Under no circumstances should these			nected to the Terminal which is marked with the let-
	connectors be used for earthed products.			ter 'L' or coloured RED.
•	All Flymo connectors and cables are of splashproof con-			4. It is important that the outer sheath is clamped cor-
	struction. They are not waterproof and must not be left			rectly into the 3-pin plug.
	outside permanently nor should they be submerged or			5. If in doubt consult your local Service Repairer or
	immersed in water. Do not let cable lay or trail through			qualified electrician before the machine is used.
	pools of water or splashed with water from hose pipes.			6. A 13 Amp fuse must be fitted to the Mains Plug.
MAINS PLUG REPLACEMENT - IMPORTANT				7. The normal plug fuse and household fuse only pro-
•	If the plug supplied is cut off it should be			tect the electrical equipment and are not a safe-
	destroyed. There is an electric shock hazard if a			guard against electrocution.
	cut off plug is inserted into a 13 amp socket.
1.	No earth required. Flymo products are double insulated			If your product is hard wired i.e. non-detachable
				mains electric cable, a conversion kit and exten-
	to EN60335 and under no circumstances should an
				sion cable is available from all Electrolux Outdoor
	earth be connected to any part of the product.
				Products Approved Service Centres which can be
2.	Ensure the mains voltage suits your product
				found in your local Yellow Pages.
			Assembly Instructions

A handle

bolt

wing knob

handle
tube	nut
B	handle
	tube
	pegs
nut	motor cover
wing knob	bolt
C
hinge
fixing pin	bracket

Assembly of handle to handle tube (A)

1.Insert the handle tube into the handle as illustrated, ensuring the handle is in an upright position

2.Insert the nut into the wing knob.

3.Secure with the bolt and wing knob.

Assembly of handle tube to motor cover (B)

1.Locate the the handle tube onto the two pegs in the neck of the motor cover.

2.Insert the bolt through the motor cover and the centre hole of the handle tube.

3.Insert the nut into the wing knob.

4.Secure with the wing knob.

Assembly of motor cover to hood (C)

• Note:- Ensure the handle is to the rear of the hood when the motor cover is fitted.

1.Align the hole in the hinge of the motor cover with the holes in the bracket on the hood. Secure by inserting the fixing pin and pressing firmly until a click is heard.

2.Repeat on the other side.

3.Secure the motor cable into the location points on the fixing plate, and to the handle tube with the cable clips provided.