Cutting Height Adjustment
L1 | Wheel removal |
L3 | Wheel removal |
| |
M2 | Levers fitted |
|
Lowest Cut Height |
L2 | Wheel removal |
|
M1 | Levers fitted |
3 | |
| 2 |
| 1 |
M3 | Levers fitted |
|
Highest Cut Height |
Cutting Height with removal of wheels (L1, L2, L3)
If your lawnmower has wheel hubs as illustrated in
Fig L1, the height of cut is adjusted by following steps L1 - L3.
1.Remove the wheel by turning the wheel hub in an anticlockwise direction (L1) and relocate in new hole (L2) turning the wheel hub in a clockwise direction to tighten (L3). Repeat for other wheels adjusting to the same position.
WARNING:
If you have levers fitted to the wheel do not attempt to unscrew the wheel hub. Use the levers to alter the height of cut.
M4 | Levers fitted |
|
| Lowest Cut Height |
M6 | Levers Fitted |
Central |
M5 | Levers fitted |
| |
| Highest Cut Height |
M7 | Levers Fitted |
Semi Central |
Cutting Height with Levers (M1 - M7)
1.If you have Height of Cut levers (Figs. M), the height of cut is altered by pulling the adjustment lever away
from the location slots and moving to the selected position (M1).
2.If your product is fitted with more than one lever then these must be adjusted to the same position (Figs. M2 &M7).
Starting and Stopping
N |
Q |
S |
P |
|
R | 1 |
To Start your Lawnmower
1.Connect female extension cable connector to the back of the switchbox. (N)
2.Form loop in mains cable and push the loop through the slot as illustrated in picture (P)
3.To secure, position loop over the hook and pull the cable back through the slot as illustrated in picture (Q).
4.Connect plug to mains and switch on.
5.Tilt the handle downwards to slightly raise the front of the lawnmower and to reduce the risk of lawn dam-
age whilst starting.
The switchbox is provided with a
6.Press and hold the
box, then squeeze one of the Start/Stop levers towards the upper handle (S).
7.Continue to squeeze the start/stop lever towards the upper handle and release the
8.Lower the lawnmower to its proper operating position
and commence mowing.
•NOTE There are two start/stop levers fitted. Either one can be used for starting the lawnmower.
•IMPORTANT Do not use the start/stop levers intermittently
To Stop Your Lawnmower.
1. Release the pressure of the Start/Stop lever.
