Maintenance
•WARNING
Cutting head continues to rotate after the trim- mer has been switched off. Keep fingers and hands clear of the line cutter on leading edge of guard.
Caring for your product
After you have finished using your product follow the pro- cedure below:
1. | Never clean your trimmer with water, cleaning fluids, |
| or solvents, just remove debris with a suitable tool, a |
| soft brush or dry cloth. |
2. | Using a soft brush, clean around the inside of the |
| safety guard, the cutting head (X1) and the motor |
| housing air vents. (X2) |
3. | Remove the wheel by pressing one of the buttons. |
| Clean the wheel and groove on trimmer head with a |
X1 |
X3 |
X2 |
| soft brush (X3 & X4). |
4. | Attach wheel as described in Wheel Assembly. |
5. | Inspect the product carefully, especially the parts of |
| the cutting head. |
6. | If your product is damaged in any way contact your |
| local Husqvarna Outdoor Products approved service |
centre.
•Never use a damaged product.
X4
Storing your product
1.Attach the Steady Handle Storage Holder to the wall with the two screws provided (Y1)
2.Store the Steady Handle in the holder as illustrated in
Fig Y2
3.Attach the Trimmer Head Storage Holder to the wall with the two screws provided (Z1)
4.Store the Trimmer Head in the holder as illustrated in
Fig Z2
•Store in a cool, dry place and out of reach of chil- dren.
Z1 |
Y1 |
Z2 |
Y2 |
