Flymo Sabre Trim Service Recommendations, Fault Finding Chart, Environmental Information, Ously

Fault Finding Chart

FAULT

LINE NOT FEEDING

OR

LINE TOO SHORT

OR

TRIMMER VIBRATES

CHECK

Is the automatic line feed work-	No
ing?
Is the line fed out and visible?
	No
Has line been removed from
cleat?
Is the manual line feed working?	No

ACTION

Manually feed out line.

SEE “MANUAL LINE FEED”

Remove cap and spool, free line

and re-fit spool and cap. SEE “CUTTING HEAD”

The line may be jammed on the spool. Rewind line to remove crossed loops. Check that line is in correct section of spool.

	Has the motor reached full	No	Allow the motor to reach full speed
CONTINUOUS CLATTER-	speed before use?		before use.
ING NOISE
	Has too much line been fed out?	Yes	SEE “MANUAL LINE FEED”
	Is the line cutter missing from		Contact your local approved Service
			Centre or Husqvarna Outdoor
		Yes
	the safety guard?
			Products Customer Service.
LINE SNAPS CONTINU-	Are you using the trimmer cor-	?	Only use tip of nylon line to trim.
	rectly?		SEE “How to trim and edge”
OUSLY
	Is the line jamming on the		Rewind the line on the spool, if
		Yes
			symptoms still persist, change
	spool?
			spool and line.
WHEEL STOPS TURNING	Clean wheel and groove on trimmer head. SEE “MAINTENANCE”

IF NONE OF THE ABOVE OR IF FAULT PERSISTS

Contact Husqvarna Outdoor Products Customer Service Telephone : 01325 302302

Environmental Information

Husqvarna Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products’ life.

•Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.

•Awareness of the environment must be considered when dispos- ing of ‘end-of-life’ product.

•If necessary, contact your local authority for disposal information.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recy- cling of electrical and electronic equipment. By ensuring this prod- uct is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please con- tact your local council office, your household waste disposal service or the shop where you purchased the product.

Service Recommendations

1.We strongly recommend that your product is serviced at least every twelve months, more often in a professional application.

2.Always use genuine Flymo Spare Parts.

3.Prepacked spares are available from most Husqvarna Outdoor Products stockists.

4.Your product is uniquely identified by a silver and black prod- uct rating label.

5.If you have a problem with your machine contact your local Approved Service Centre ensuring you have full details of your product as described on the product rating label.

6.Should it be necessary for work to be carried out by your Service

Centre, it is important to take your complete machine including cable and any extension cables used.

A network of specialist dealers can be found in your local Yellow Pages. To obtain service on your Flymo product simply telephone or visit your local Service Centre. Should you require service under the terms of our guarantee the Service Centre will require proof of purchase.

All of the centres listed stock genuine Flymo Spare Parts.

NOTE: Our Service Repairers act on their own behalf and are not empowered to commit or legally bind Husqvarna Outdoor Products in any manner whatsoever.