www.fmiproducts.com 121353-01H2
SAFETY
WARNING: Improper
installation, adjustment,
alteration, service or
maintenance can cause
injury or property dam-
age. Refer to this manual
for correct installation
and operational proce-
dures. For assistance or
additional information
consult a qualified in-
staller, service agency or
the gas supplier.
WARNING: This ap-
pliance is for installation
only in a solid-fuel burning
masonry or UL127 fac-
tory-built replace, or in a
listed ventless rebox en-
closure. It is design certi-
ed for these installations
in accordance with ANSI
Z21.11.2. Exception: Do
not install this appliance
in a factory-built replace
that includes instructions
stating it has not been test-
ed or should not be used
with unvented gas logs.
This appliance may be in-
stalled in an aftermarket,*
pe rman ent ly loc ate d,
manufactured (mobile)
home, where not prohib-
ited by local codes.
This appliance is only for
use with the type of gas
indicated on the rating
plate. This appliance is
not convertible for use
with other gases.
* Aftermarket: Completion of sale, not for
purpose of resale, from the manufacturer
WARNING: This product
con tain s an d/or ge nera tes
chemicals known to the State
of California to cause cancer or
birth defects, or other reproduc-
tive harm.
IMPORTANT: Read this owner’s
manual carefully and completely
before trying to assemble, op-
erate, or service this heater.
Improper use of this heater can
cause serious injury or death
from burns, fire, explosion,
electrical shock, and carbon
monoxide poisoning.
TAbLE OF CONTENTS
Safety ..................................................................2
Product Identication ...........................................5
Local Codes.........................................................5
Unpacking............................................................5
Product Features .................................................5
Remote Control Accessories ...............................6
Air for Combustion and Ventilation ......................6
Installation ...........................................................8
Operation ...........................................................18
Inspecting Burners.............................................22
Cleaning and Maintenance ................................23
Wiring Diagram ..................................................24
Troubleshooting .................................................24
Specications ....................................................28
Replacement Parts ............................................28
Service Hints .....................................................28
Technical Services .............................................28
Accessories .......................................................29
Parts ..................................................................30
Warranty ..............................................Back Cover