Insert a FireStore FSHDD-1 FireWire HDD
to the internal drive slot or connect a FireWire
disk drive to the HDD I/O port. If a FSHDD-1
FireWire HDD comes from the factory, it
should be configured and ready to use. If
the message No Disk Detected appears,
ensure you have a FSHDD-1 FireWire HDD
inserted properly. If the message No Format
Detected appears, you will first need to
partition and format the inserted drive. DR-
DV5000 will prompt you through the steps
required to perform a format. WARNING:
Formatting will erase all data on disk!
Once ready for use, the DR-DV5000 default
Splash Screen will appear as follows:
1.Play/Record Status Symbol
This symbol displays a graphical
representation of the current DR-DV5000
playback, stop, record or pause state.
2.Record/Play Status Indicator
In this space, DR-DV5000 will display a
character that notifies the user what record
or playback mode they are in. The characters
displayed and their respective modes are listed
on page 41 of this User Guide.
3.Current System Status
The current status of DR-DV5000 will be
displayed in this area. For instance, it will
display whether DR-DV5000 is in record, play,
stop, pause, fast search or slow motion modes.
4.Volume Number
The volume or disk number of the current clip
recording or playback session is displayed in
this area of the LCD. For example, a display
value of 2-014 identifies a track as being on
volume 2.
5.Track or Clip Number
This area displays the current clip or track
number being recorded or played back. For
example, a display value of 2-014 identifies
a track as being clip 14 on volume 2.
6.Timecode/User Bit Display Mode
This identifies the display mode for timecode
or user bit values. Selections are:
COUNTER - counts frames during record
or playback of the current clip only.
REMAINING - counts down the number
of frames available (time) on a particular disk
during a record session. In a playback session,
this display shows the remaining time on the
current clip.
FireStore DR-DV5000 User Guide
PAGE 14
1253 4678910 11 12