If an error is found, the user will be prompted
to repair the file. File repair only takes a few
moments to complete in most cases.
CURRENT CLIP does a similar function, but
on the selected clip only. If an error is found,
DR-DV5000 will prompt the user to repair
the problem.
File Name
File Name displays the base file name of the
selected clip.
Factory Reset
When this function is selected, DR-DV5000
will revert all settings and values back to
their factory default state. Pressing YES will
start factory reset. Pressing EXIT or NO will
exit from menu. Warning: Factory Reset is
not un-doable!!!
The following screen will display when complete:
Factory Default States Are as Follows:
Display:
• COUNTER
Rec Mode:
• DEFAULT REC MODE: NORMAL
• RETRO DISK – RETRO VALUE -> 000min
• RETRO CACHE – CACHE ->00 sec
• TIME LAPSE –> 00:00:00:00
Play Mode:
• DEFAULT PLAY MODE: PLAY CLIP
Control Mode:
• DEFAULT CONTROL MODE: LOCAL
• SERIES REC -> OFF