T H E F O O D S AV E R U S E R M A N U A L
How To Vacuum Package Using the FoodSaver
Jar Sealer with Mason Jars
5Set the Sealing Time Adjustment Switch to “1.” Vacuum package as per instructions on page 10, steps
6Remove the FoodSaver Jar Sealer by twisting gently while lifting up. Make sure that the metal lid on jar is securely in place. It should not move.
IMPORTANT: Remember to remove the Accessory Hose from the Accessory Port on the appliance before you vacuum package in FoodSaver Bags. Remove the hose by gently twisting the gray fitting while pulling it out. Never yank or tug the hose as this may damage both the hose and the fitting.
How to Open the Mason Jar
To open the mason jar, wedge a spoon between the mason jar lid and the highest part of the threaded rim. Twist the spoon gently to release the vacuum. When opened this way, the mason jar lid can be reused many times.
IMPORTANT: To avoid accidents, do not use a knife to remove the mason jar lid. Also, do not use a bottle opener to remove the mason jar lid as it will bend the lid and prevent its reuse.
Vacuum packaging is not a substitute for canning.
NOTE: Do NOT attempt to vacuum package any contents that are warmer than room temperature since the vacuum may cause the contents to bubble out of the jar.
T H E F O O D S AV E R U S E R M A N U A L
How To Vacuum Package Using FoodSaver Universal Lids
The Universal Lid is ideal for keeping foods, such as sauces, peanuts and coffee, fresh longer in their original containers. These lids work with metal cans, thick glass jars and rigid plastic containers. Remember, perishable goods should still be refrigerated. Also, if you plan to store food in cans for more than a day, it is advisable to transfer food into a plastic or glass container to prevent
CAUTION: FoodSaver Universal Lids are not to be used with thin glass, crystal, plastic or aluminum containers. The force exerted by the FoodSaver vacuum packaging system is very powerful and could implode a thin glass or a
1Turn the knob on the Universal Lid so the arrow points to “Vacuum.”
2Place the Universal Lid on top of the open container. Leave at least one inch between the contents and the rim of the canister.
3Set the Sealing Time Adjustment Switch to “1.” Vacuum package as you would a Square or Bulk Canister. (See page 15, steps
IMPORTANT: Remember to remove the Accessory Hose from the Accessory Port on the appliance before you vacuum package in FoodSaver Bags. Remove the hose by gently twisting the gray fitting while pulling it out. Never yank or tug the hose as this may damage both the hose and the fitting.
How to Open the FoodSaver Universal Lid
To open the FoodSaver Universal Lid, turn the knob so the arrow points to “Open.” This will release the vacuum and allow the lid to be removed.
18 | 19 |
