FSR1634_V2000series .qxd 6/2/07 16:54 Page 2
Getting Started
Registering your appliance is quick and easy at www.foodsaver.com.
How to Make a Bag from a FoodSaver® Roll
FoodSaver® Accessories
Accessories include FoodSaver® Vacuum Packaging Canisters, Universal Lids, Jar Sealers and Bottle Stoppers.
FoodSaver® Accessory Guidelines
Features
Shown V2020; 2040, 2050, and V2060 operate in the same manner.
V2020/V2040/V2050/V2060 Features
1.Always leave at least one inch of space between contents and rim.
2.Wipe rim of canister, container or bottle to ensure it is clean and dry.
3.Place lid on canister or container, or place stopper in bottle.
4.For accessories with a large knob on lid, turn knob to Vacuum. Vacuum package using instructions below. When vacuum process is complete, turn knob to Closed before removing Accessory Hose (A).
5.For accessories without a large knob on lid, vacuum package using instructions below.
The
I Vacuum Indicator Light |
Monitors the vacuum and |
|
|
|
| Rolls& |
Place Bag on Sealing Strip |
| |||
Press Lid and Push Seal Button | ||||
1. | Pull out enough bag material to hold item to be | 3. Press Seal Button. When the seal indicator light | ||
| vacuum packaged, plus 3 inches. | (L) turns off, open lid and remove bag. | ||
2. | Place one end of bag material across Sealing Strip | Now you are ready to vacuum package with your new | ||
|
|
|
(G) and close lid. Press lid until latches click.
bag (see below).
How to Vacuum Package with FoodSaver® Bags
Place Loaded Bag on Sealing Strip | Press Lid and Push Button |
| ||
1. | Place item(s) in bag, allowing at least 3 inches | 6. When motor and Indicator Lights (I) turn off, open | ||
| of space between bag contents and top of bag. | lid and remove bag. Refrigerate or freeze if needed. | ||
2. | Open appliance lid and place open end of bag | (See FoodSaver® Reference Guide for food safety tips.) | ||
| down into Vacuum Channel (E). | Note: Let appliance cool down for 20 seconds | Bags | |
3. | Close lid. | |||
after each use. | ||||
4. | To begin vacuum process, press down firmly on | |||
|
How to Vacuum Package with FoodSaver® Accessories
Insert Accessory Hose | Press Lid and Push Button | |
1. Prepare container according to FoodSaver® | 4. When motor and Indicator Lights (I) turn off, | |
Accessory Guidelines above. | vacuum process is complete. | |
2. Insert one end of Accessory Hose (A) into | 5. Gently twist and remove Accessory Hose from | |
Accessory Port (J) on appliance. Insert other | accessory and appliance. Unlock latches. | |
end into port on accessory. Twist gray tab while | 6. To test vacuum, simply tug on accessory lid. | |
inserting to ensure a tight fit. | It should not move. | |
3. To begin vacuum process, press down firmly on lid | Note: For important tips on using accessories | |
until latches click. For models V2020, V2040 and | ||
with different foods, please refer to the FoodSaver ® | ||
V2050, press Canister Vacuum Button (M). For | ||
Reference Guide. | ||
model V2060, push the Vacuum & Seal Button (K). | ||
| ||
Motor will run until vacuum process is complete. |
|
How to Open FoodSaver® Accessories afterVacuum Packaging
FoodSaver® Vacuum Packaging Canisters | IMPORTANT: Do NOT use screw bands when |
| |
(without large knob on lid) | vacuum packaging jars. To open, wedge spoon |
| |
To release vacuum and open, push gray rubber | between Mason jar lid and highest part of threaded | ||
button on lid. | rim. Twist spoon gently to release vacuum. | Accessories | |
FoodSaver® Bulk Canisters and Quick Marinators | FoodSaver® Bottle Stoppers | ||
(with large knob on lid) and Universal Lids | |||
| |||
To release vacuum and open, twist and pull up on | |||
|
To release vacuum and open, turn knob on lid
sealing process. |
LSeal Indicator Light Constant light indicates sealing process is engaged.
JAccessory Port Attach accessory hose here and use to vacuum package with FoodSaver® Canisters and Accessories.
MCanister Vacuum Button (Models V2020, V2040 and V2050) Press to achieve best vacuum
for canisters and accessories.
K Vacuum & Seal Button This button has three uses:
1. Press to vacuum package and seal your food
2. Press to cancel process at any point. | |
3. Press to vacuum canisters when using | |
model V2060. |
|
N CrushFree™ Instant Seal Button |
|
This button has three uses: |
|
1. Press to immediately stop the vacuum process | |
and begin sealing the bag. Use to prevent crushing | |
delicate items such as bread, cookies and pastries. | |
2. Press to create a seal when making bags from | |
| Features |
to Open.
Bottle Stopper.
lid with both hands until latches click. |
5. Press Vacuum & Seal Button (K). |
FoodSaver® Jar Sealer with Mason Jars
For use with Ball® and Kerr® brand Mason jars.
a FoodSaver® Roll. |
3. Press to create a seal on Mylar bags (such as a |
potato chip bag) to keep food sealed |