Configuring the FortiGate unit to operate in NAT/Route mode | NAT/Route mode installation |
|
|
config system admin |
|
edit admin |
|
set password <psswrd> |
|
end |
|
To configure interfaces
1Log in to the CLI.
2Set the IP address and netmask of the internal interface to the internal IP address and netmask that you recorded in Table 6 on page 28. Enter:
config system interface edit internal
set mode static
set ip <address_ip> <netmask>
end
Example
config system interface edit internal
set mode static
set ip <192.168.120.99> <255.255.255.0>
end
3Set the IP address and netmask of the external interface to the external IP address and netmask that you recorded in Table 6 on page 28.
32 | Fortinet Inc. |
