Fortinet 127, 500A, FORTIGATE, Network Router - page 41

Transparent mode installation Reconnecting to the web-based manager
FortiGate-500A Installation Guide 01-28005-0101-20041015 41
Example
config system manageip
set ip 10.10.10.2 255.255.255.0
end
3Confirm that the address is correct. Enter:
get system manageip
The CLI lists the management IP address and netmask.
To configure DNS server settings
1Set the primary and secondary DNS server IP addresses. Enter
config system dns
set primary <address_ip>
set secondary <address_ip>
end
Example
config system dns
set primary 293.44.75.21
set secondary 293.44.75.22
end
To configure the default gateway
1Make sure that you are logged into the CLI.
2Set the default route to the default gateway that you recorded in Table8 on page 38.
Enter:
config router static
edit 1
set dst 0.0.0.0 0.0.0.0
set gateway <address_gateway>
set device <interface>
end
Example
If the default gateway IP is 204.23.1.2 and this gateway is connected to port2:
config router static
edit 1
set dst 0.0.0.0 0.0.0.0
set gateway 204.23.1.2
set device port2
end