44 01-28005-0101-20041015 Fortinet Inc.
Reconnecting to the web-based manager Transparent mode installation
To set the date and time
For effective scheduling and logging, the FortiGate system date and time must be
accurate. You can either manually set the system date and time or configure the
FortiGate unit to automatically keep its time correct by synchronizing with a Network
Time Protocol (NTP) server.
1Go to System > Config > Time.
2Select Refresh to display the current FortiGate system date and time.
3Select your Time Zone from the list.
4Optionally, select Automatically adjust clock for daylight saving changes check box.
5Select Set Time and set the FortiGate system date and time.
6Set the hour, minute, second, month, day, and year as required.
7Select Apply.
To use NTP to set the FortiGate date and time
1Go to System > Config > Time.
2Select Synchronize with NTP Server to configure the FortiGate unit to use NTP to
automatically set the system time and date.
3Enter the IP address or domain name of the NTP server that the FortiGate unit can
use to set its time and date.
4Specify how often the FortiGate unit should synchronize its time with the NTP server.
5Select Apply.
To register your FortiGate unit
After purchasing and installing a new FortiGate unit, you can register the unit by going
to the System Update Support page, or using a web browser to connect to
http://support.fortinet.com and selecting Product Registration.
To register, enter your contact information and the serial numbers of the FortiGate
units that you or your organization have purchased. You can register multiple
FortiGate units in a single session without re-entering your contact information.
To configure virus, attack, and spam definition updates
You can configure the FortiGate unit to automatically keep virus, grayware, and attack
definitions up to date.
1Go to System > Maintenance > Update Center.
2Select Refresh to test the FortiGate unit connectivity with the FortiProtect Distribution
Network (FDN).
To be able to connect to the FDN the FortiGate unit default route must point to a
network such as the Internet to which a connection to the FDN can be established.
If FortiProtect Distribution Network changes to Available, then the FortiGate unit can
connect to the FDN.
3Select Scheduled Update and configure a schedule for receiving antivirus and attack
definition updates.
4Select Apply.
5You can also select Update Now to receive the latest virus and attack definition
updates.