Digital clock
Clock numbers show hours
Upon immediate hooking up of the oven or after a blackout, three zeros will flash on the programmer panel.
To set the hour it is necessary to push simultaneously the 
+ 
buttons and AT THE SAME TIME to push the [+] button or
The regulation speed depends on the pressure exercised on the [+]
Manual cooking without using the programmer
To use manually the oven, that is, without the auxiliary programmer, it is necessary to cancel the flashing «AUTO» by pushing
the 
button.
If «AUTO» is always flashing (it means a cooking program is still memorized) it is necessary to cancel the inserted cooking
program by pushing the | button until |
setting the clock on zero. |
|
Automatic cooking (start and end)
1)Set the length of cooking time by pushing
the 
button.
2)Set the end of cooking time by pushing
the 
button.
3)Set temperature and cooking program by using the thermostat knob and the selector knob.
After this setting the symbol «AUTO» will flash, this means the oven has been programmed.
An example: cooking lasts 45 minutes and is expected to stop at 14.00.
-Push 
until having set 0.45.
-Push 
until having set 14.00.
After having finished the setting, the clock hour will appear on the panel and «AUTO» symbol will flash permanently. This means the cooking program has been memorized.
At 13.15 h. (14.00 h. minus 45 minutes ) the oven turns on automatically.
During cooking time the 
button and «AUTO» are flashing.
At 14.00 h. the oven turns off automatically, a buzzer goes on until it is stopped by pushing the 
button.
18
