Semiautomatic operation with cooking duration
Select cooking duration function 
and set required duration with the +/- keys on the right. “AUTO” (B) and cookpot (C) symbols appear. If time of day = cooking end time the relay output and the cookpot symbol (C) are switched off. The audible signal sounds.
The symbol “AUTO” (B) blinks. The cooking will be finished.
Semiautomatic operation with cooking end time
Select cooking end time function 
and set required end time using the +/- keys on the right. The “AUTO” (B) and cookpot (C) symbols appear. Turn the switch knob and the thermostat knob to the cooking function and to the desired temperature.
If time of day = cooking end time the oven doesn’t heat any longer and the cookpot symbol (C) are switched off. The audible signal sounds and “AUTO” (B) blinks.
Fully automatic operation
1)Set the length of cooking time by pushing the 
button and the +/- keys on the right.
2)Set the end of cooking time by pushing the 
button and the +/- keys on the right.
3)Set temperature and cooking program by using the thermostat knob and the selector knob.
After this setting the symbol “AUTO” (B) will appear, this means the oven has been programmed. When the time in the display is the same of the cooking start time the cookpot symbol (C) will appear and the oven will start to work.
Cooking Start Time= Cooking End Time – Cooking Duration Time An example: cooking lasts 45 minutes and is expected to stop at 14.00.
- Push | and “+” key on the right until having set 0.45. |
- Push | and “+” key on the right until having set 14.00. |
After having finished the setting, the clock hour will appear on the panel and “AUTO” symbol (B) will flash permanently. This means the cooking program has been memorized.
21
