Fostex DV40 manual TC Setup mode details, To enter the TC Setup mode

TC Setup mode details

The TC Setup mode allows you to set the following which are necessary for recording/play- back of time code or synchronizing the unit to external time code.

1.Editing time code generated by the internal TC generator

2.Editing the chase offset to external time code

3.Trimming the chase offset

4.Chase mode selection

5.Capturing the LTC time for storing it as the chase offset (Catch offset)

6.Editing the LTC start time

7.Force jamming to external time code

8.Selecting output time code

9.Time code output on/off selection while paused

10.TC user bit output selection

• To enter the TC Setup mode

1. Press the [SHIFT] key to turn on the indicator, then press the [CHASE/(TC SETUP)] key.

The unit enters the TC Setup mode and the display shows a menu. The first time the unit enters the TC Setup mode after turning on the power, the "Chase Offset?" menu is shown. Otherwise, the display shows the menu previously selected.

H M S F SF

OFFSET CHASE

Flashing

2.Use the jog dial (or [SKIP/CURSOR] [<<] / [>>] keys) to select the desired menu.

You can cycle through menus in the following order (or reverse order).

H M S F SF

OFFSET CHASE

Flashing

Flashing

H M S F SF

OFFSET CHASE

Flashing

Flashing

		Flashing							Flashing
H	M	S	F	SF	H	M	S	F
OFFSET					GEN
				Flashing			Flashing

H M S F SF

H M S F

GEN

Flashing

Flashing

5-5