11
VF-16
4-4-1. SCSI Port Check
If the VF-16 does not recognize a connected SCSI drive or the SCSI drive is not actually connected, the following will
be displayed on the LCD.
The following will be displayed when the SCSI drive is connected properly but the disk is not put in the drive.
The following will be displayed when the disk put in the SCSI drive is not formatted.
The following will be displayed when the SCSI drive (ZIP 100 in this case) is correctly recognized.
4-4-2. ATA (E-IDE) Bus Check
This test checks if data can be properly read out from the preformatted internal E-IDE hard disk.
If the “ALTERNATE STATUS” indicating the hard disk condition cannot be read out correctly, the following will be
displayed.