![](/images/new-backgrounds/1261362/26136221x1.webp)
Chapter 2
Installing and Configuring Rack-Mounted Systems
Before You Begin
Unpacking and Inspecting
The following items are shipped with these systems.
Foundry system | Two | ||
AC power cord | Two | ||
| | Four #6 screws | |
| Male | | Four each #6 flat washers and #6 lock washers |
Female
| Four | | Registration card |
| Quick start guide | | Warranty form |
If any of the above items are missing or defective, contact Foundry.
Additional Cables, Tools, and Materials
The following additional cables are required for integrating these systems with other networking devices.
•
•
•
•#3 Phillips screwdriver (rackmount)
•#2 Phillips screwdriver (mounting bracket)
•1/8 inch (3 mm)
•wire stripping tool (DC power and external alarm)
The following additional materials are required for connecting DC power, ground, and external alarms to the Foundry system.
•
•18 AWG wire (DC power)
June 2004 | © 2004 Foundry Networks, Inc. | 2 - 1 |